Articles

This is an IoT ceiling light controller which includes an HC-SR501 PIR motion sensor. It is built around a Wemos D1 mini (ESP8266 breakout board), which controls a homemade TRIAC breakout board. TRIACs provide the advantage of switching devices on and off silently, as opposed to a mechanical relay.

The thermal insulation of my apartment not being the best, I decided to buy an electric heater in order not to freeze during cold winter nights. However, the one I got was probably too powerful for my needs and letting it run for too long would heat up my place too much. Thus, I added a wifi enabled controller to it so its operations are controlled by my home automation system.

Smartwatches can be rather expensive and tend to be known for their poor battery life. On the other hand, Xiaomi's Mi band 2 is cheap and its battery lasts for up to 20 days. However, the Mi band 2 is mainly limited to fitness tracking functions, at least without the appropriate apps.

This project consists of an HC-SR501 PIR motion sensor and a DHT22 temperature and humidity sensor connected to a Wemos D1 mini, an ESP8266 breakout board.

One of the companies I used to work for had a serious bathroom issue: My floor had only three toilet stalls for about 200 employees. There were countless times when I would walk all the way to the bathroom only to find all stalls occupied. I built this simple system to quickly identify whether one or more stall were. It consists of an IoT sensor installed on the bathroom stalls' door and an indicator placed somewhere easily visible.

I wanted my home automation system to detect when I arrive home so as to unlock my door automatically or let me know if I leave the apartment without turning the A/C off. I figured my smartphone could be used to achieve this since it is equipped with a vast array of sensors and connectivity options. For example, I could use an app like OwnTracks which would send an MQTT message once I enter a certain perimeter around my apartment. However, constantly monitoring one's GPS location is wasteful in terms of battery life. Another option would be to ping my phone's IP address to check if it is connected to the WiFi, but smartphones can sometimes take a while to connect. So, I decided to use BLE advertising, which does not use too much battery while still remaining constantly active.

Few would argue that having lights turned on in a room without occupant is a waste of electricity. Ideally, lights and other appliances like air conditioners would only be turned on when someone is around. This project is a NodeJS application that gathers data about the occupancy of an apartment and manages appliances accordingly.

I've been using&nbsp;<a href="https://www.home-assistant.io/" rel="noopener noreferrer nofollow">Home Assistant</a>&nbsp;to control my home IoT devices for a while. Although it fulfills all my needs, I wanted to make my own system so as to get a fully customized smart home control panel and learn how to build such an application in the process.

Have you ever left your apartment and couldn't remember if you locked your front door or not? Sadly, if it is unlocked, there is not much you can do about it until you get back home. This system is an attempt to solve the problem. Simply put, it consists of attaching an actuator to the door's original locking mechanism control it with through WiFi.