Articles

Have you ever left your apartment and couldn't remember if you locked your front door or not? Sadly, if it is unlocked, there is not much you can do about it until you get back home. This system is an attempt to solve the problem. Simply put, it consists of attaching an actuator to the door's original locking mechanism control it with through WiFi.

Although probably in the decline, infrared is a common way to remotely control household appliances such as air conditioners or TVs. Being able to turn on an AC unit without leaving the sofa is definitely comfortable, but sometimes it would be even better to be able to do it before even getting home. In order to control those various appliances, I designed a simple WiFi controlled IR emitter.

One day I got fed up with my solder spool rolling around all the time so I designed this simple spool holder in Fusion360 and 3D printed it.

I am not much of a cook so salads are usually one of my favorite options for a healthy meal. So, just like for everything else, I started wondering if I could make my own. However, I don't have access to a garden so I started looking into solutions to grow vegetables indoors. I settled for hydroponics, which seemed to provide a good balance between yield and operational hassle. Specifically, I went for a Deep Water Culture type of hydroponic system as it is usually considered easy for beginners to setup.

Mounting a USB dock to the back of my laptop stand using 3D printed parts designed in FreeCAD.

RFID tags are great but often easy to lose. To solve this problem, I designed this case for an RFID tag, which can be worn on one's wrist using a standard watch strap. The case was designed using Fusion360 and then 3D printed.

The thermal insulation of my apartment not being the best, I decided to buy an electric heater in order not to freeze during cold winter nights. However, the one I got was probably too powerful for my needs and letting it run for too long would heat up my place too much. Thus, I added a wifi enabled controller to it so its operations are controlled by my home automation system.

Over the years, I have built multiple IoT devices ranging from AC controllers to ceiling lights. Usually, I would control those devices using my smartphone or computer but sometimes a physical button can be more convenient. Thus, I designed this simple IoT button which publishes MQTT messages when pressed.

Having one's own server provides the ability to run web services 24/7. However, having a computer running all the time can significantly increase one's electricity bill. The objective of this project was to build a low power home server capable of running common software (Apache, Node.js, etc.) while only consuming little power.

I got myself a fume extractor but it takes a rather large amount of real-estate on my desk. I decided to mount it on an arm so that I could easily move it out of the way so I designed and 3D printed an attachment bracket for it.