Articles

When you don't know how much power your air conditioner draws, it's easy to leave it running without feeling too guilty. And then the electricity bill comes...

RFID is a conveninent technology for access control and authentication. In this project, I connected an RC522 RFID reader to an ESP32 in order to use it for IoT applications. Additionally, to provide feedback to the user, the ESP32 is also connected to an SSD1306 OLED display and a buzzer. I chose an ESP32 over an ESP8266 simply because of the amount of GPIOs required.

Keeping track of one's body weight usually involves manually writing down measurements on a spreadsheet or similar. To automate the process, I removed the electronics of a cheap scale, keeping only the load cells, and replaced it with my own.

An IoT RGBW LED controlled via MQTT with integrated motion and illuminance sensor.

Air conditioners consume a fair amount of electricity. As such, forgetting to turn one off before leaving one's home can result in an expensive electricity bill. This is a Wi-Fi enabled controller for air condtioners, which can turn the unit on or off according to MQTT messages. It is built around an Wemos D1 mini and interfaces with the AC using an IR LED.

I got my hands on a 600W 12V inverter so I decided to experiment with generating my own electricity.

This is an IoT ceiling light controller which includes an HC-SR501 PIR motion sensor. It is built around a Wemos D1 mini (ESP8266 breakout board), which controls a homemade TRIAC breakout board. TRIACs provide the advantage of switching devices on and off silently, as opposed to a mechanical relay.

The thermal insulation of my apartment not being the best, I decided to buy an electric heater in order not to freeze during cold winter nights. However, the one I got was probably too powerful for my needs and letting it run for too long would heat up my place too much. Thus, I added a wifi enabled controller to it so its operations are controlled by my home automation system.

Smartwatches can be rather expensive and tend to be known for their poor battery life. On the other hand, Xiaomi's Mi band 2 is cheap and its battery lasts for up to 20 days. However, the Mi band 2 is mainly limited to fitness tracking functions, at least without the appropriate apps.