Articles

RFID is a conveninent technology for access control and authentication. In this project, I connected an RC522 RFID reader to an ESP32 in order to use it for IoT applications. Additionally, to provide feedback to the user, the ESP32 is also connected to an SSD1306 OLED display and a buzzer. I chose an ESP32 over an ESP8266 simply because of the amount of GPIOs required.

This headset enables the overlay of information on top of its user's field of view. The field of view of the user is captured by a camera and then fed to video goggles, while a MAX7456 OSD chip overlays text on the video feed.

A company I worked for had a coffee machine for which employees could purchase coffee. However, the payment was done by putting coins in a jar. Not only did this present the obvious risk of theft, this system was also impractical for people not carrying spare change at all time. I decided to solve this issue by designing this cashless payment system.

Have you ever left your apartment and couldn't remember if you locked your front door or not? Sadly, if it is unlocked, there is not much you can do about it until you get back home. This system is an attempt to solve the problem. Simply put, it consists of attaching an actuator to the door's original locking mechanism control it with through WiFi.

Air conditioners consume a fair amount of electricity. As such, forgetting to turn one off before leaving one's home can result in an expensive electricity bill. This is a Wi-Fi enabled controller for air condtioners, which can turn the unit on or off according to MQTT messages. It is built around an Wemos D1 mini and interfaces with the AC using an IR LED.

Wifi controlled smart light bulbs can now be purchased from less than USD 10. However, those can often only be used by a specific application provided by the vendor and can involve exchanging data with a third party server. I wanted a solution to use my own software while benefiting from the cheap hardware so I replaced the wifi module of a a cheap Wifi light bulb my own electronics.

Smart lights are usually some of the first appliances to be added to a smart home. Although those can nowadays be purchased easily from various brands, I wanted to have my own hardware so as to integrate it better with other devices and software. Thus, I decided to an IoT LED controller that I can use in various projects where lighting has to be controlled via network protocols.

Although probably in the decline, infrared is a common way to remotely control household appliances such as air conditioners or TVs. Being able to turn on an AC unit without leaving the sofa is definitely comfortable, but sometimes it would be even better to be able to do it before even getting home. In order to control those various appliances, I designed a simple WiFi controlled IR emitter.

I got my hands on a 600W 12V inverter so I decided to experiment with generating my own electricity.

The SONOFF S20 is a cheap Wifi smart socket that enables the remote control of appliances for less than USD 10. Although the hardware is more than decent, its usage requires a proprietary app which most likely involves a third party server between the user and the device. Since the socket uses an ESP8266 at its core, I decided to write my own firmware for it.